Non Slam Disc Check Valve

        PDF

Non Slam Disc Check Valve (PN40)

Stainless Steel
METAL TO METAL SEATING
SOFT SEATING AVAILABLE ON REQUEST.
SUITABLE FOR INSERTION BETWEEN #150/300/Non IBR AND IBR FLANGES

HYDRAULIC TEST PRESSURE 60 Bar
HYD. SEAT TEST PRESSURE 44 Bar
MAXIMUM ALLOWABLE TEMP. 425 °C
S. No. Partname Material Specification
1 Body S.S CF8 / CF8M
2 Disc S.S CF8 / CF8M / AISI 304
3 Spring S.S AISI 304 / AISI 316
4 Spring Lock S.S AISI 304 / AISI 316
Normal Size A B C D
15mm (1/2″) 60 15 39 17
20mm (3/4″) 70 20 47 20
25mm (1″) 80 25 55 23
32mm (1″ - 1/4″) 90 32 66 28
40mm (1 - 1/2″) 102 38 76 34
50mm (2″) 117 50 90 40
65mm (2″ - 1/2″) 139 65 109 46
80mm (3″) 160 75 128 53
100mm (4″) 184 95 148 63
150mm (6″) 240 135 212 80

Important

Due to Continous development programme, design and data in leaflet are subject to change without any notice.

IBR TEST CERTIFICATES IN FORM III C
are supplied with all valves.

Guarantee

All valves are guranteed against manufacturing defects for a period of 18 months from the date of supply or 12 months from the date of installation whichever ends earlier.However our libality is\limited to repair/replacement of complete valve or defective parts as found suitable.