Ball Float Steam Trap

        PDF

Ball Float Steam Trap

Screwed Female Ends
Ball Float Stem Trap is timely removal of condensate from the pipe line wirhout steam losses.it is mechanical steam trap which works on the principle of difference between densities of steam and condensate.suitable for Driers, Unit Heater,Heat Exchangers and injected vesseles etc.

S. No. Partname Material
1 Body C.I / S.G / Caste Steel
2 Bonnet C.I / S.G / Caste Steel
3 SLR Assembly AISI 304
4 Nut and Bolt H T Carbon Steel
5 Gasket CAF
6 Seat Chamber AISI 304
7 Nut and Bolt AISI 304
8 Seat Assembly AISI 304
9 Drain Plug AISI 304
10 Air vent valve AISI 304
11 Ball AISI 304
Normal Size A B C H1 H2 L
15mm (1/2″) 1/2″ BSP 102 133 163 41 130
20mm (3/2″) 3/4″ BSP 102 133 163 41 130
25mm (1″) 1″ BSP 117 197 200.5 51 132
40mm (1 - 1/2″) 1 - 1/2″ BSP 150 224 256 64.5 270
50mm (2″) 2″ BSP 170 248 265 72 300
Body Design PN 16 PN 25 PN 40
Max. Allowable Pressure 10 bar g at 225 °C 17 bar g at 225 °C 28 bar g at 225 °C
Max. Allowable Temp. 225 °C 425 °C 425 °C
Max. Operating Pressure 10 bar g at 225 °C 17 bar g at 225 °C 28 bar g at 225 °C
Max. Operating Temp. 200 °C 400 °C 400 °C
Max. Differential Pressure 4.5/10/14 bar g 4.5/10/14 bar g 4.5/10/14 bar g
Max. Hyd. Body Testing 24 bar g 34 bar g 60 bar g
End Connections Screwed Female Ends To BSP/BSPT/NPT/Socket Weld

Important

Due to Continous development programme, design and data in leaflet are subject to change without any notice.

IBR TEST CERTIFICATES IN FORM III C
are supplied with all valves.

Guarantee

All valves are guranteed against manufacturing defects for a period of 18 months from the date of supply or 12 months from the date of installation whichever ends earlier.However our libality is\limited to repair/replacement of complete valve or defective parts as found suitable.